Pleated Air Filters

PRE-PLEAT® M13 – MERV 13, - Leed Compliant Filter

Pre-Pleat M13 pleated panel filters are the ideal choice to achieve the minimum efficiency requirements of LEED® Green Building design. The low initial resistance of the M13 can also contribute an overall strategy of reducing energy consumption. Its one-inch, two-inch or four-inch depth makes MERV 13 upgrades as trouble-free as a direct replacement for most commercial and industrial applications.

Pre-Pleat® 40 LPD - MERV 8A Pleated Filter

Distinctions can be made in air filter technology. Flanders is committed to continuously developing new and improved products to assist in an environmentally responsible, healthy, and prosperous environment. Flanders Pre-Pleat 40 LPD achieves the highest dust holding capacity and the lowest pressure drop in the industry, while maintaining a mechanical MERV 8 per ASHRAE Standard 52.2-2007. Classified UL 900

VP-MERV 8A - Pleated Filter

The VP-MERV 8A Pleated filter achieves MERV 8A efficiency with low resistance to airflow per ASHRAE 52.2-2007. Its filtering medium does not rely on electrostatic charge to capture particulate which will dissipate over time and during use. Our newest pleated filter, the VP-MERV 8A is an environmentally friendlier filter than the conventional beverage board framed filter. It uses 20% fewer fibers; fewer fibers equal real savings and supports environmental source reduction programs.

Pre-Pleat® - Class 1 Pleated Filter

This pleated air filter is designed for applications where a UL Class 1 fire rated filter is required and metal frame filters are unsuitable because of disposal problems. The Pre-Pleat Class 1 pleated air filter has been tested by Underwriters Laboratories, Incorporated and found to meet the stringent performance characteristics of a Class 1 air filter for flammability, as outlined in Standard 900. Class 1 air filter units are described as "Those that, when clean, do not contribute fuel when attacked by flame and emit only negligible amounts of smoke.”

Pre-Pleat® - High Temperature

Flanders Pre-Pleat HT filters are designed for increased air filtration efficiencies in an operating environment where temperatures reach 400 degrees Fahrenheit. Typical examples include air intakes for drying ovens or high temperature baking applications.

Pre-Pleat® HV - High Velocity Pleated Filter

The Pre-Pleat HV pleated filter from Flanders Precisionaire is designed to operate in high velocity and turbulent air applications where standard pleated filters have a tendency to fail. They are ideal for gas turbine and rotary machinery equipment or any area requiring a pleated filter to operate under demanding use. Pre-Pleat HV filters are offered in the most popular face sizes in 2” and 4” depths.

Pre-Pleat® 62RM11 - MERV 11 Pleated Filter

Pre-Pleat 62RM11 pleated panel filter enables a significant upgrade in collection efficiency over existing MERV 8 products at the same resistance levels. A 25-30% average efficiency filter can be upgraded to 60-65% efficiency at roughly the same resistance levels.

Please check back frequently for product updates.